6in Line Voltage IC Air Tight Remodel Housing for Sloped Recessed Lighting
Buy 6 or more. Save 5%.
Only 15 Left in Stock
Usually ships the next business day
- Maximum watts: 75
- PAR30 halogen or A19
- UL listed, damp locations
- Several Knockouts: junction box has seven 1/2in knockouts and four pry-out slots with strain relief
- Maximum Slope Angle: Pitch: 6/12; Angle: 22-1/2 Degrees
Shop More Nora Lighting Products
No reviews yet
Be one of the first to Write a review.
Question from Ken:
Answer from Pegasus:It's elliptical. 6.5in x 7.0in in diameter.
Question from Pedro:
Answer from Pegasus:Pedro, Yes, the clips attach to the slot. No, we do not have alternative housing clips.
Question from Aaron:
Answer from Pegasus:The manufacturer has not tested these with LED light bulbs. LED light bulbs can fit BUT there are concerns about the weight and heat management of the LED light bulbs.
Question from Christine T. Place, Architect:
Answer from Pegasus:Christine, Since this housing is IC rated, it can come in direct contact with ceiling insulation and even can be covered with it.
Question from Michellle Shoven:
Answer from Pegasus:You can use either one. The long necks will stick down further, which some prefer.
Question from Dan:
Answer from Pegasus:The manufacturer specs state: Construction Maximum Angle Pitch: 12/12; Angle: 45° (with designated trim)
Question from Michelle Bejarano:
Answer from Pegasus:This sloped ceiling housing will require an elliptical opening. We strongly suggest that holes NOT be cut before the product is on site. Please see Spec Sheet link here for further Important information. http://noralighting.com/uploads/specs/NHRIC-926QAT_spec.pdf
Question from Matt:
Answer from Pegasus:The trim ring is sold separately.
Question from Billy:
Answer from Pegasus:Per the manufacturer: Angle: 22-1/2 Degrees, Pitch: 6/12