Halogen Low Voltage Button Puck Light
Buy 6 or more. Save 5%.
Usually ships the next business day
FREE Shipping Orders $25+
- Surface mount or recessed mount
- Surface mount diameter 2.625in
- Recessed mount diameter 2.125in
- Hardwire or plug-in
- 72in lead wires
- UL listed
Required Accessories Sold Separately
- One 12-volt electronic transformer is required for powering the puck lights. Be sure to select a transformer with a wattage rating equal to or slightly greater than the total wattage of the puck lights being powered.
- Calculating Total Wattage: to determine the transformer you need, calculate the total wattage rating of your installation by multiplying the number of puck lights you intend to power by 20 watts. For example, for 3 puck lights, you would need to select a transformer rated for at least 60 watts (3 Puck Lights x 20W/puck = 60W).
Optional Accessories Sold Separately
- Multiple Terminal Block: easily wire multiple output connections together for a neat under cabinet installation of Puck Lights without the use of open splices.
Shop More WAC Lighting Products
No reviews yet
Be one of the first to Write a review.
Question from Frank:
Answer from Pegasus:There is a silver trim ring that holds the glass in place. Use your finger nail or a small screw driver and lift the edge of this trim ring and it pops out.
Question from Joh:
Answer from Pegasus:There are spring clips on the side of the fixture after you remove the decorative surface mount cover.
Question from Mike:
Answer from Pegasus:Mike,The lead wire from the halogen puck light is 72 inches.
Question from Steve:
Answer from Pegasus:You could use a hardwire transformer that is wired to a wall switch. Another alternative, you could wire to a plug in transformer that has an on/off switch like the EN-1260-P-AR-BK. https://www.pegasuslighting.com/electronic-transformers/black-60w-12v-plug-in-electronic-transformer-detachable-cord-wac-lighting.html
Question from Bo Clark:
Answer from Pegasus:The recessed portion of this fixture measures slightly less than 3/4". There are compression springs to hold the fixture into place. https://www.pegasuslighting.com/files/pdfs/halogen-puck-light-low-voltage-button-install-instructions.pdf
Question from Alberto Martinez:
Answer from Pegasus:We would suggest you use some type of battery operated light with either an on/off motion sensor, or remote control for this type of application. Due to heat build up of any puck light, we would not suggest using in this installation. https://www.pegasuslighting.com/battery-operated-under-cabinet-lighting/3-pack-led-battery-operated-puck-light-with-remote-control.html https://www.pegasuslighting.com/battery-operated-under-cabinet-lighting/led-battery-operated-track-light-with-remote-control.html