Availability: Out of Stock
- Recessed mount
- Brushed chrome finish
- Cool white light
- 1-Year warranty
- Call for custom orders
- Complete Kits: we bundle the required components together for discount pricing. In addition to the puck light(s), the kit includes,(1) Li-Ion Battery Pack with Smart Charger, (1) power connector for linking the pucks to the battery pack.
- (8) 5 star reviews
- (4) 4 star reviews
- (2) 3 star reviews
Easy efficient upgrade for halogens without re-sizing installation holes
Submitted by DL | 5.25.14
Very bright. Easy to install. Good quality. Long expected life. Low heat dissipation / efficient. Light color comparable to original halogen. Easy fit upgrade to my existing flush halogen cabinet lights.
Slight delay in turning on. LED lights may not be user replaceable (entire individual assembly may need probably need to be replaced). Higher initial cost. No dimmer included or listed in options. Limited number of lights (3?) possible per individual supply.
Submitted by Bob | 2.25.13
Easy to install and the kit came with everything to make it work.
Question from Jeff Johnson:
Answer from Pegasus:Jeff: The only way that I would know is to replace the halogen light bulb in the fixture with an LED one. However, I am not familiar with any LED light bulbs that would replace a lamp used in puck lights. One other thing to know is that LEDs use a driver to power the light while low voltage halogen use a low voltage transformer.
Question from John:
Answer from Pegasus:John, these puck light kits cannot be dimmed by a wall dimmer. They are dimmable with the in-line dimmer accessory (sold separately) and the included driver.
Question from Lou:
Answer from Pegasus:Lou, please give us a call and we will be happy to assist you with ordering the parts you need.
Question from Andrea:
Answer from Pegasus:These puck lights run off of an external battery pack. Check out the 4th image to see what it looks like. The battery pack plugs into the included charger to recharge.
Question from Scott:
Answer from Pegasus:You are going to have a tough time finding a puck light that can be directed upward. Most puck lights must be pointed downward or too much heat will shorten the life of the product. I would suggest looking for an up light product instead.
Question from Mike:
Answer from Pegasus:Mike, I'm sorry - no, the connectors are not removable. Note that the dimensions of the connectors are only 5/8 inches x 3/8 inches.
Question from Andrew Quinn:
Answer from Pegasus:The actual diameter of the recessed part of the housing is approximately 1-7/8 inches. But you will have to account for the mounting clips on the side, making it a little over 2-1/8 inches. I think it will be a tight fit into a 2-1/8 inch hole, but it could work.
Question from Jane Salvaggio:
Answer from Pegasus:Jane, this item does not have replacement bulbs. The LEDs are a built-in module.
Question from Andrea:
Answer from Pegasus:No, they are not dimmable.
Question from Rick Batchelor:
Answer from Pegasus:They are 4000K
Question from Adam:
Answer from Pegasus:Adam, I would not use a transformer instead of the included driver. Transformers work a bit different from constant voltage drivers. I would also not recommend using your own wire. These puck lights are intended to be plug and play connections. There is a compatible extension cable, although this simply extends the distance between the driver and the power connector.
Question from Bill:
Answer from Pegasus:No, these lights are not dimmable
Question from ATC Electric:
Answer from Pegasus:No, these puck lights are not dimmable.
Question from Brent:
Answer from Pegasus:Brent, I checked with the manufacturer and they estimate these puck lights are roughly equivalent to a 35-50W halogen puck light. Hope this helps.
Question from suett:
Answer from Pegasus:Yes, it is dimmable with the in-line dimmer listed in the Accessories.