6in Line Voltage IC Air Tight New Construction Housing for Sloped Recessed Lighting
Availability: In Stock
Usually ships in 2-3 business days
- Maximum watts: 75
- PAR30 halogen or A19
- Order lamp separately
- UL listed, damp locations
- Several Knockouts: junction box has three 1/2in knockouts, two 3/4in knockouts, and four pry-out slots with strain relief
- (8) 5 star reviews
- (4) 4 star reviews
- (2) 3 star reviews
Question from Ted:
Answer from Pegasus:Ted: Yes. The can is adjustable for 2 x 8 construction. In addition, the height of the can including the bar hangers is 7 inches and this housing can be used anywhere from a 2/12 to 6/12 pitched ceiling.
Question from Mia:
Answer from Pegasus:No, this housing accepts A19 or PAR30 light bulbs. PAR38 would be too wide.
Question from Rich:
Answer from Pegasus:Yes you can use an LED light bulb. If the light bulb is dimmable, then you can certainly dim it.
Question from Dennis Scearce:
Answer from Pegasus:Dennis, I am not sure exactly what part of the fixture you are wanting to protrude 1-5/8in and exactly what you mean by beyond the face of the joist. I hope this answer helps clear up the dimensions. The bar hangers adjust from 13-5/8in to 24in to accommodate different joist spacing. The can adjusts to work with sloped ceilings with angles from 1 to 27 degrees. The dimensions of the housing are 7.0in high x 9.5in wide x 13.0in long. Your ceiling thickness should be between 5/8in and 1-3/8in.
Question from Jeremy Oliverio:
Answer from Pegasus:The housing is 7in in height, so no, it will not fit.
Question from Don Allard:
Answer from Pegasus:No, it will not. It will work for 2/12 to 6/12 pitched ceilings.