4in 277V Input Low Voltage IC Air Tight New Construction Housing for Recessed Lighting
Availability: In Stock
Usually ships in 2-3 business days
- IC rated
- Use MR16 halogen
- Maximum wattage: 50
- UL listed, damp locations
- Several Knockouts: junction box has four 1/2in knockouts, two 3/4in knockouts, and four more knockouts with true pry-out slots
No reviews yet
Be one of the first to Write a review.
Question from Curt Jones:
Answer from Pegasus:Curt: It sounds like the transformer is shutting down. Obviously this is good as this action works as an overload protection. The shutdown could be caused from overheating either due to loose wire connections, wrong gauge of wire (romex or otherwise) or too high wattage of lamp. The 4in low-voltage fixtures are rated for up to 50 watts. Also, maybe there is an overloaded circuit in the electrical panel the housing is connected to? Finally, if the housing is on a dimmer, a dimmer designed specifically for magnetic transformers is recommended. I hope this helps.
Question from Mike:
Answer from Pegasus:Mike, This housing's transformer has a minimum required load of 20W, so no, you cannot use an LED because they are generally much lower in wattage.
Question from LM:
Answer from Pegasus:The max ceiling thickness is 1.25in
Question from J:
Answer from Pegasus:J - this product is manufactured by Nora Lighting, based out of California. See more info about them here: http://www.noralighting.com/Article.aspx?aid=2