Availability: In Stock
Usually ships in 2-3 business days
- 4 finishes
- Order lamp separately
- Adjustable gimbal ring
- Easy to install
- One 12-volt electronic transformer is required for powering the recessed light. Be sure to select a transformer with a wattage rating equal to or slightly greater than the total wattage being powered.
- Calculating Total Wattage: to determine the transformer you need, calculate the total wattage rating of your installation by multiplying the number of lights you intend to power by the wattage of the light bulb you intend to use. For example, for 3 lights using 20W MR11 light bulbs, you would need to select a transformer rated for at least 60 watts (3 Recessed Lights x 20W/Recessed Light = 60W).
- MR11 Light Bulb: uses a 12-volt MR11 low voltage halogen light bulb. (Light bulb ordered separately.)
- Light Bulb Wattage: maximum of 20 watts
- (8) 5 star reviews
- (4) 4 star reviews
- (2) 3 star reviews
Only fixture that into 3.5-inch space!!!
Submitted by SteveOKC | 11.11.13
Fits 3.5in depth.
2 5/16 hole. Must use 2 1/4 or 2 1/2 hole saw.
Question from Wayne Evitt:
Answer from Pegasus:Wayne, You will need to gently remove the retaining ring that keeps the trim attached to the housing.
Question from Luke:
Answer from Pegasus:Yes - 1/2in thickness is the max.
Question from Pamela Woodin:
Answer from Pegasus:Yes, just make sure you are meeting any minimum wattage requirements of the transformer you are using.
Question from Onna:
Answer from Pegasus:Onna - gently remove the retaining ring in order to replace the MR11.
Question from Joe:
Answer from Pegasus:Joe, I see no reason why these lights won't work for your application.
Question from Mak:
Answer from Pegasus:Mark, I am not sure what you mean by between a 2x4 wall. Here are the dimensions of the product. Hope this helps. Outside Diameter of Trim: 2-5/8in Ceiling Hole Diameter: only 2-5/16in Housing Dimensions: only 3-3/8in high Take a look at the installation instructions on the Description tab for helpful diagrams.