Availability: In Stock
Usually ships in 2-3 business days
- Order lamp separately
- Easy to install
- One 12-volt electronic transformer is required for powering the recessed light. Be sure to select a transformer with a wattage rating equal to or slightly greater than the total wattage being powered.
- Calculating Total Wattage: to determine the transformer you need, calculate the total wattage rating of your installation by multiplying the number of lights you intend to power by the wattage of the light bulb you intend to use. For example, for 3 lights using 20W MR11 light bulbs, you would need to select a transformer rated for at least 60 watts (3 Recessed Lights x 20W/Recessed Light = 60W).
- MR11 Light Bulb: uses a 12-volt MR11 low voltage halogen light bulb. (Light bulb ordered separately.)
- Light Bulb Wattage: maximum of 20 watts
- (8) 5 star reviews
- (4) 4 star reviews
- (2) 3 star reviews
Fair Price/Prompt Shipping
Submitted by Tim | 9.20.11
Question from Jim Slater:
Answer from Pegasus:Jim, Thanks for the question. In addition to the PNM-243, you will need to order 20W halogen MR11 light bulbs and an appropriate transformer. To determine the transformer you need, simply multiply the lights you intend to power by 20W. For example, if you intend to power 3 lights, you will need a transformer rated for 60W. I would also recommend ordering a multi-tap connector to make installation easier. All of these items are listed on the Accessories tab of the product page. For installation instructions, check out this PDF: http://site.pegasuslighting.com/pdfs/MiniatureRecessedInstall.pdf
Question from James:
Answer from Pegasus:James, you can use one of the multi-tap connector accessories to make it very easy to wire multiple fixtures to a single transformer. You wire the fixtures to the multi-tap connector and then wire the multi-tap connector to the transformer.