300W - 12V - Plug-In - Outdoor Magnetic Transformer - Photocell and Timer
Buy 6 or more. Save 5%.
Only 6 Left in Stock
Usually ships the next business day
- Plug-in transformer
- Maximum watts: 240
- Outdoor use
- UL listed
- 1-Year warranty
No reviews yet
Be one of the first to Write a review.
Question from Jeffrey R. Miles:
Answer from Pegasus:The photocell is built into the transformer.
Question from Bud:
Answer from Pegasus:Bud, This transformer is designed to work with 12-Volt incandescent light bulbs.
Question from John:
Answer from Pegasus:John, Transformer compatibility with LED MR16 light bulbs can sometimes be an issue. I would suggest checking with the manufacturer of the LED light bulbs for recommended transformers. Some are best used with electronic transformers while others perform best with magnetic transformers like this one. The transformer can certainly handle the load of (9) 9W MR16 light bulbs.
Question from Tom Elwell:
Answer from Pegasus:It's a best practice to load magnetic transformers 80% of their nominal load. So in this case, 240W. So if you are to use 20W 12V bulbs, then you should not exceed 12 on the circuit.
Question from Joe Stines:
Answer from Pegasus:As long as you are not exceeding the maximum wattage rating of this transformer then no it will not be a problem.
Question from Kevin:
Answer from Pegasus:This transformer is not dimmable.
Question from bob kerns:
Answer from Pegasus:You would need to multiply the wattage of each light times the number of bulbs. If you have 35 watt bulbs you would need you would need a transformer that was 280 watts or higher, as 35 x 8 = 280
Question from don:
Answer from Pegasus:The "8" indicates that the transformer was programmed to keep the lights on for 8 hours.