14-inch 2700K LED Straight Edge Versatile Mount Linear Strip Light
Buy 6 or more. Save 5%.
Out of Stock
- Impressive light output
- Only 0.5in thick
- Four mounting positions
- No UV/IR
- Hardwire or plug-in
- Accessories Included: each fixture includes two flat and two 45 degree angle mounting clips, one "I" connector for linking fixtures end-to-end, and two mounting screws.
Required Accessories Sold Separately
- Required Transformer: each run of light fixtures requires an electronic transformer with a specific connector designed for this system. To determine the appropriate transformer, total the wattage of the run and select a transformer rated equal to or slightly greater than the total wattage of the run.
Optional Accessories Sold Separately
- Joiner Cables: available in several lengths. Electrically links 2 fixtures together over a short distance or around corners.
- Mounting Clips: adjustable clips are available
- Layout Accessories: a variety of layout accessories, including splitters, wire clips, and extension cables are available.
Shop More WAC Lighting Products
No reviews yet
Be one of the first to Write a review.
Question from Jamey Kirby:
Answer from Pegasus:The LED Straight Edge Strip Lights meets the NEC code of having a lens cover to eliminate an exposed lamp. Should you decide to use this fixture I would recommend using the 4500K color temperature.
Question from John R.:
Answer from Pegasus:The dimensions for the transformer will depend on which model you use. Check out the Accessories for the list of transformer options. On each transformer's product page we list the dimensions. Thanks!
Question from Luis:
Answer from Pegasus:Luis, check out this product instead - http://www.pegasuslighting.com/hera-led-line-voltage-linkable-linear-light-fixture-elite.html It has a frosted diffuser so the LEDs won't be reflected.
Question from Patricia:
Answer from Pegasus:Patricia, You will need a transformer for each run. If the cases are near each other you may be able to use joiner cables to link them together and connect the run to a single transformer. If they are not near each other than yes you will need a transformer for each case. I would suggest mounting them on the top of the case in the corner where they are concealed. You could use the 45 degree angle mounting clips (included) to direct the light onto the jewelry.
Question from Ed:
Answer from Pegasus:Ed, Yes, 3 26in fixtures can be wired together to a single transformer and dimmer. For a run of 3 26in fixtures, you will need to use one of the 60W transformers. You have a choice between a plug-in model or hardwire model. The compatible transformers are listed in the Accessories section of the page. To determine pricing for the LED Straight Edge Strip Lights, simply select your option in the drop down options list. Transformer and dimmer prices are listed on each product page.
Question from Luis:
Answer from Pegasus:Absolutely! You will need to use one of the hardwire transformers.
Question from John:
Answer from Pegasus:John, It goes on the 120V side of the transformer. I would specifically recommend the Lutron Skylark electronic low voltage dimmer. It tends to work best with LED lights because it's the simplest of the Lutron dimmers.
Question from Michelle:
Answer from Pegasus:Michelle, It does not have bulbs so no. This light strip uses integrated LEDs.
Question from Kathy:
Answer from Pegasus:Yes. A transformer is required for these light fixtures no matter the length of your run.
Question from Idonna:
Answer from Pegasus:Idonna, yes I think you could use it for this application. It's super low profile so it will be easily hidden and you can hardwire it and dim it.
Question from Michael:
Answer from Pegasus:Michael, Yes, it would work well for closet application. I would suggest picking the longest length that fills up the space you are wanting to illuminate. That way you have even lighting.