Using the 3 Wire Light Connector made it easy to string a set of light fixtures together from one shelf to the next shelf. I used a plastic C shaped cover that I picked up at a local computer store with adhesive strips to stick to the wall to cover the 3 Wire Light Connector at the end of the shelves which matches the color of the wall. You don't really notice it from a distance that a wire is present. With the light fixtures having the corresponding plug at each end that is needed for the 3 Wire Connector makes it a breeze to add from one fixture to the next. You just have to keep in mind that as you add fixtures power demand changes also on one string of lights. Pegasus web site has a page explaining this in detail. I recommend that you check this out before adding to your first fixture.
I have 3 coves that will require 2 fixtures each...the distance for the flex connector between coves #2 and #3 is right at 12in (12in might be too short and the 24in is way too much)...Should I go with 24in to be safe or is there extra length on the 12in flex connector?
My advice is to go with the longer cord because you know it will reach.
Question from Didier Mory:
Hi, I want to put lights under the two cabinets that are on each side of my range. To do so I would need a 60in link wire but the longest one you sell is 36in. Is there a way to get it done? Thanks Didier