18W - 350mA - Hardwire - Dimmable Electronic Constant Current LED Driver - Lightech
Availability: In Stock
Usually ships in 2-3 business days
- 18 Watts max
- UL recognized
- Powers 18 watts of LED Very Thin Light Bars and other LED lighting systems that require 350mA of constant current. Enclosure stores electrical connections.
- (8) 5 star reviews
- (4) 4 star reviews
- (2) 3 star reviews
No reviews yet
Be the first to Write a review.
Question from Tom:
Answer from Pegasus:7-1/8 L X 1-7/8 W X 1-1/4 H Yes, it will fit in the enclosure. The 8W driver for the PRULER fixtures is not dimmable so no you can't connect it to the dimmer. You can connect two dimmable drivers to a single dimmer.
Question from Tim:
Answer from Pegasus:We recommend dimming these drivers with Lutron's C-L dimmers because they are specifically designed to handle low wattage loads.
Question from Doug C:
Answer from Pegasus:Doug, You cannot connect the PRULER's flexible connectors together, so you won't be able to make the jump using them. The best way to wire two separate areas of kitchen counters is to use two power connectors attached to one driver. When wiring two power connectors to a driver, they do not connect in parallel. They connect in series so that one black wire and one red wire hook up to the driver. The other red and black power connector wires connect to each other.
Question from Rick:
Answer from Pegasus:Yes, the manufacturer recommends using C-L dimmers with this driver.