4in Line Voltage Recessed Lighting Trim with Adjustable Gimbal
Availability: In Stock
Usually ships in 2-3 business days
- 2 finishes
- Outside diameter 4.75in
- Order lamp separately
- Recessed Trim: includes recessed trim and clips for securing trim to housing.
Required Accessories Sold Separately
No reviews yet
Be one of the first to Write a review.
Question from DMC:
Answer from Pegasus:It's suitable for use in damp locations. It can be installed outdoors as long as it's protected from direct water spray, e.g. rain.
Question from Hanae:
Answer from Pegasus:Yes, you can use the LED light bulb with the trim.
Question from Nick:
Answer from Pegasus:Nick, Absolutely!
Question from Paul:
Answer from Pegasus:Paul, These trims can be used with IC housings or with remodel housings.
Question from Nabil:
Answer from Pegasus:Nabil, For a ceiling that is 20ft high, I would recommend using a housing & trim that uses a higher wattage lamp than this. Also, make sure your housing & trim are designed for sloped ceilings. I would recommend this trim because it can use up to a 90W PAR38 halogen - a very bright light bulb. http://www.pegasuslighting.com/6inch-recessed-lighting-trim-open-gimbal-sloped-ceiling-par38.html
Question from Bob:
Answer from Pegasus:The housings used with this trim are rated for damp locations. I would be most concerned about the amount of moisture the light fixture would be exposed to under a soffit. My suggestion would be to look for an IP66 rated housing or one that is suitable for wet locations. Unfortunately, we do not carry an IP66 housing.
Question from Lee:
Answer from Pegasus:Lee, We strongly recommend using this trim with a housing from the same manufacturer (see accessories tab for compatible housings). There are a few reasons for this. First of all, mixing manufacturers will generally void the warranty and UL listing for both trim & housing. Also, it is not certain that the trim will fit perfectly in a housing from a different manufacturer.
Question from ST:
Answer from Pegasus:Any PAR20 bulb that follows ANSI (standard) dimensions will be acceptable. PAR20 bulbs are 2.5in in diameter and length is approximately 3.25in.
Question from Steve:
Answer from Pegasus:The outside diameter, or full diameter, is 5in.