This track pack features a sleek, modern design in two attractive finishes to blend into your decor. All the components you need to install these lights are included - track, three fully adjustable track heads, and a floating canopy to connect to an existing outlet box. This track pack is designed for indoor locations and is UL listed.
Complete Kit: each track pack includes
4 Feet of track
(3) PAR30 flat back cylinder track heads
(2) End caps
(1) Floating canopy for connecting to existing outlet box anywhere on the track
2 Attractive Finishes:
White (Model # NTL-151)
Black (Model # NTL-151B)
Single Circuit Track: extruded aluminum track with 20-amp rated flat, solid integral conductors and equipped with two end caps
Track Dimensions: 11/16in(H) x 1-7/16in(W) x 4ft(L)
Track Head Diameter: 4-3/8in
Light Bulbs Separate: uses 3 Halogen or LED PAR30 light bulbs (sold separately)
Track Head Wattage: maximum of 75 watts per track head
Easy Light Bulb Replacement: easy front light bulb replacement is performed without tools or disassembly
Dimmable: yes, with line voltage dimmers
Line Voltage: 120 volts, 60Hz
Installation: please refer to these Installation Instructions (PDF). [Caution: Always check local electrical codes and the National Electrical Code (NEC) before installing any lighting products. It is also wise to consult with a licensed electrician in your geographical area about any electrical details that you might have questions about and to make certain that you are satisfying all of the appropriate electrical codes.]
UL Listed for Dry Locations
Brand: Nora Lighting
Large Quantity Discount: If you would like us to quote on a large quantity of Nora 3-Head 4-Foot PAR30 Flat Back Cylinder Track Packs, please call us at our toll-free number or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.
How do you adjust or move the heads up or down the track? My installer discarded the packaging and instructions after installing and positioning as he thought the heads should be. I would like to move the heads to a different position on the track.
By Jacob from Pegasus Lighting on May 26, 2015
You need to remove the track heads from the track to change the position.
To remove the track heads:
1. Firmly grasp contact adapter sleeve and pull down.
2. Rotate contact counterclockwise approximately 90 degrees.
3. Pull fixture down to remove from track groove.
By Jack Freethy from Lafayette, CA. on October 1, 2014
Can you cut the length of this tack down to 3 feet?