LED Recessed Mini Step Light

Description of LED Recessed Mini Step Light

This bright LED recessed mini step light is easy to install in stairs, aisles, decks, gazebos, home theaters, lobbies, and walkways. Durable construction and a 60,000 hour rated life make this a high-quality product.

LIGHT FIXTURE

• 1 Model: brushed steel (P023-0001)
• Durable Construction: durable powder coated steel housing with epoxy resin coating and gasketed cover for indoor and outdoor use, with steel spring clips that hold the step light firmly in place
• Damp Location Rated: steel housing has an IP65 rating (totally protected against dust and protected against low pressure jets of water from all directions)
• Very Shallow Depth: only 1-5/8in deep overall
• Inside Diameter of Brushed Steel Trim: 31/32in
• Outside Diameter of Brushed Steel Trim: 2in
• Hole Cut-Out Size: 1-1/2in
• Spec Sheet: click LED Mini Step Light to learn more details
• Included with Fixture: one power connector/extension cable is included with each LED mini step light purchased. An LED driver, required to power the step lights, is sold separately on the Accessories tab, along with any needed Terminal Blocks and End Caps required to complete the electrical circuit for powering one or more step lights.
• Hardwire: this fixture may be installed as a hardwire light

LIGHT SOURCE

• LED: bright white LED with a warm color temperature of 3100K
• Very Good CRI: 85 Color Rendering Index
• Excellent Rated Life: 60,000 hours
• Cool Operation: gives off very little heat

ELECTRICAL FEATURES

• Linkable: multiple LED mini step lights can be linked together. The maximum number that can be linked is determined by the wattage of the LED driver being used to power the lights. For example, a maximum of 8 LED mini step lights linked together in series can be powered by one 10-watt constant current LED driver.
• Energy-Efficient: uses only 1.25 watts of power
• 38in Leads: each LED Mini Step Light has 38in leads made up of two 24 gauge wires with a single Molex-like connector attached to their ends
• Power Connector/Extension Cable: this multi-use cable (made up of 22 AWG wire) with 78-inch leads and 2 ports, one is included with each step light ordered, can be used as a Power Connector and/or an Extension Cable. Extra connectors can be ordered on the Accessories tab.
• Switching: the LED drivers we offer may be controlled by a single on/off wall switch. A Hardwire LED driver can be controlled by a single on/off wall switch if it is hardwired directly to the on/off wall switch
• Not Dimmable: this LED Mini Step Light is not dimmable

REQUIRED ACCESSORIES

• All of these Accessories are purchased separately on the Accessories tab.
• Power Supply: one 350 mA constant current LED driver is required for each continuous run of LED Recessed Mini Step Lights. All of our LED drivers are UL recognized in the USA & Canada. [Caution: Be sure that the total wattage of all of the LED Recessed Mini Step Lights in a single continuous run does not exceed the wattage of the constant current LED driver used to power that run. Also, be sure that the LED Mini Step Lights and the constant current LED driver are connected in series with each other – not in parallel.]
• End Cap: needed to complete the electrical circuit. (Please refer to the Table of Components on the Specifications & Measurements tab to determine the number of End Caps that will be needed for your circuit.)
• Table of Components: for a complete listing of how many components you will need to complete your lighting project please see the Specifications & Measurements tab

OTHER

• Easy to Install: for complete details with photos please read these Installation Instructions
• Large Quantity Discount: If you would like us to quote on a large quantity of LED Recessed Mini Step Lights, please call us at our toll-free number, 800.392.4818, or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.