This dimmable LED puck light is designed for recessed or surface mounting in residential and commercial applications. Up to 20 puck lights may be linked together in a variety of attractive finishes to blend into any decor. This puck light is rated for 70,000 hours, is UL listed, and carries a 5-year warranty.
6 Attractive Finishes:
Brushed Nickel (PHR-LED-87S-27-BN)
Copper Bronze (PHR-LED-87S-27-CB)
Dark Bronze (PHR-LED-87S-27-DB)
Glass Beam Spread Lens
Versatile Mounting: can be either surface mounted or recessed mounted. Note: not recommended for use in ceiling.
Housing Dimensions: when surface mounted its dimensions are 2.25in diameter x 7/8in thick; recessed mounted its dimensions are 1-7/8in diameter x 5/8in thick.
Cutout: 2-1/8in hole size for recessed mounting
Durable Construction: die-cast aluminum fixture, stamped steel housing for surface mount
Long Electrical Leads: 72-inch 14AWG electrical lead wires that connect to an electronic transformer
Switching: for plug-in installations control using plug-in driverís rocker switch. For hardwire installations control using wall switch or electronic low voltage dimmer.
Intended to Shine Down: has been designed to be used so that the light is directed downward. If the Puck Light is installed so that it is facing upward, too much heat may be trapped inside the fixture.
6 LEDs Included
Wattage: only 4.8 watts
Light Output: 155 lumens
Warm White Light: color temperature of 2700K, warm white
Excellent Rated Life: 70,000 hours rated life on average
Good Color Rendering: 85 CRI
No Harmful UV/IR Radiation: UV radiation from incandescent and fluorescent light sources can sometimes cause color change and surface deterioration over time
Dimmable: yes, down to 10% when powered by a dimmable electronic transformer
REQUIRED ELECTRONIC TRANSFORMER
One 24-volt AC electronic transformer is required for powering each run of puck lights. Two types of drivers are available. Be sure to select a driver with a wattage rating equal to or slightly greater than the total wattage of the puck lights being powered (ordered separately).
Calculating Total Wattage: to determine the electronic transformer you need, calculate the total wattage rating of your installation by multiplying the number of puck lights you intend to power by 4.8 watts. For example, for 5 puck lights, you would need to select an electronic transformer rated for at least 24 watts (5 Puck Lights x 4.8W/puck = 24W).
Dimmable Hardwire Driver: choose from 60- or 96-watt models. Up to 12 puck lights can be connected with the 60-watt model. Up to 20 puck lights can be connected with the 96-watt model.
Dimmable Plug-In Driver: up to 12 puck lights can be connected
All of these items are ordered separately:
Terminal Block: recommended for easily connecting up to 6 puck lights to a single hardwire driver.
Electronic Low Voltage Dimmers: in-wall dimmer for use with dimmable electronic transformer
Easy to Install: please refer to these Installation Instructions (PDF). [Caution: Always check local electrical codes and the National Electrical Code (NEC) before installing any lighting products. It is also wise to consult with a licensed electrician in your geographical area about any electrical details that you might have questions about and to make certain that you are satisfying all of the appropriate electrical codes.]
UL Listed in the USA & Canada
Brand: WAC Lighting
Large Quantity Discount: If you would like us to quote on a large quantity of LEDme Square Button Puck Lights, please call us at our toll-free number or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.