Description of 60-Watt 12-Volt DC Dimmable Hardwire Constant Voltage LED Driver
This dimmable hardwire driver will power up to 60 watts of LED lights. It’s backed by a 3-year warranty and is suitable for indoor and outdoor use.
Maximum 60 Watts of Load: Do not try to power an LED lighting system that needs more than 60 watts of power. If powering more than 48 watts of load, be sure to have 12in of clearance above and around housing.
Minimum 24 Watts of Load: requires a minimum load of 40% for proper operation
Dimmable: with most low voltage magnetic dimmers
Input: 120 volts AC, 50/60 Hz
Output: 12 volts DC
Color: black
Dimensions: 3in(H) x 3in(W) x 9.25in(L)
Indoor or Outdoor Use
3-Year Warranty
Large Quantity Discount: If you would like us to quote on a large quantity of 60-Watt 12-Volt DC Hardwire Constant Voltage LED Drivers please call us at our toll-free number, 800.392.4818, or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.
By Alan Loh from Los Altos, CA on October 1, 2012
I want to power 12' of PTL-60 (53W). Your info mentions 12" of clearance above and around dimmable driver. I want to wall mount the 60W dimmable driver with 12" above only. How hot will it run? Is this dangerous?
By Jacob from Pegasus Lighting on October 2, 2012
Answer:
Alan,
As you have guessed, heat is the issue. If you are going to install your driver in a confined place, then I would go to the next wattage up just to be safe.
your satisfaction with our products,
your satisfaction with our customer service,
the “bulletproof” security of our web site,
and your absolute and total privacy.