Description of 100-Watt 12-Volt DC Dimmable Hardwire Constant Voltage LED Driver
This dimmable hardwire driver will power up to 100 watts of LED lights. Itís backed by a 3-year warranty and is suitable for indoor and outdoor use.
Maximum 100 Watts of Load: Do not try to power an LED lighting system that needs more than 100 watts of power. If powering more than 80 watts of load, be sure to have 12in of clearance above and around housing.
Minimum 40 Watts of Load: requires a minimum load of 40% for proper operation
Dimmable: with most low voltage magnetic dimmers
Input: 120 volts AC, 50/60 Hz
Output: 12 volts DC
Dimensions: 4in(H) x 4in(W) x 9.5in(L)
Indoor or Outdoor Use
Large Quantity Discount: If you would like us to quote on a large quantity of 100-Watt 12-Volt DC Hardwire Constant Voltage LED Drivers please call us at our toll-free number, 800.392.4818, or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.
By Lorraine Dunn from Phoenix,AZ on November 1, 2012
Can I get multiple runs out of this? If so, how? Splitter or two leads?
By Jacob from Pegasus Lighting on November 1, 2012
Use a wire nut to wire the positive leads of each run together and then connect to the positive side of the driver.
Do the same for the negative leads.
As long as you do not overload the driver, this will work fine.
100-Watt 12-Volt DC Dimmable Magnetic Hardwire Constant Voltage LED Driver
5 Stars based on 1 Review(s)
Orange County, California
I would recommend this item to a friend.
October 13, 2012
This thing is built like a tank! I was very pleased by its performance and quality. I would definitely buy this product again and recommend it to others.