Chat Contact Us Contact Us
Now In: Ceiling Lighting  >  Fiber Optic Ceiling Lights  >  LED Fiber Optic Star Ceiling Kits with Assorted Diameter Fibers

Product Overview:
  • White light
  • Various diameter fibers
  • Creates near/far effect
  • Twinkle wheel
  • Remote control
  • LED illuminator
  • Plug-in
  • Learn More

Need Assistance?

Have a Question?

LED Fiber Optic Star Ceiling Kits with Assorted Diameter Fibers

Pegasus Lighting BBB Business Review

LED Fiber Optic Star Ceiling Kits with Assorted Diameter Fibers

OptionsSelect Number of Fibers: 
AvailabilityUsually ships the next business day
Quantity  Add to cartAdd to Wishlist

About our LED Fiber Optic Star Ceiling Kits with Assorted Diameter Fibers

Make your ceiling come alive with a myriad of twinkling stars using fiber optic star ceiling kits. These kits include fibers with a variety of diameters, creating a near and far effect for the stars. Use the twinkle wheel to make the stars glimmer and control the kit with the convenient remote. The LED illuminator uses only 5 watts of power and has a rated life of 50,000 hours.


  • 4 Star Ceiling Kits:
Model# PFOSC-200X PFOSC-250X PFOSC-300X PFOSC-350X
Total Number of Fibers 200 250 300 350
Fibers with 0.75mm Diameters 100 150 200 250
Fibers with 1mm Diameters 80
Fibers with 1.5mm Diameters 20
Length of Fibers 9.8ft 11.8ft 13.1ft
Recommended Room Size 70 sq ft 100 sq ft 130 sq ft 170 sq ft
  • How it Works: the star ceiling fiber optic acrylic fibers transmit light from an LED illuminator to your ceiling while a twinkle wheel (with alternating opaque and transparent sections) rotates in front of the LED inside the illuminator creating a mesmerizing twinkling effect at the other end of the fibers
  • No Heat: fiber optic illumination gives off with no heat


  • LED Illuminator: energy-efficient white LED illuminator with twinkle wheel
  • Wattage: only 5 watts
  • Excellent Rated Life: 50,000 hours of rated life on average
  • 4-Foot Power Cord
  • Remote Control Included: the remote has (2) buttons - A and B. A controls the off and on mode. B controls the twinkle (twinkle on or twinkle off).


  • Installation Instructions: please refer to these Installation Instructions (PDF). Always check local electrical codes and the National Electrical Code (NEC) before installing any lighting products. It is also wise to consult with a licensed electrician in your geographical area about any electrical details that you might have questions about and to make certain that you are satisfying all of the appropriate electrical codes.
  • Ceiling Access: access above the ceiling is required because this is where all of the fibers and the illuminator will be stored
  • Not Under Water: neither the fibers nor the illuminator should be used under water


  • Large Quantity Discount: If you would like us to quote on a large quantity of LED Fiber Optic Star Ceiling Kits, please call us at our toll-free number or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.

1-Year Warranty   Satisfaction Guarantee   Quick Ship Item   Installation Difficulty

Product Reviews
LED Fiber Optic Star Ceiling Kits with Assorted Diameter Fibers
5 Stars based on 4 Review(s)
Prior Lake, MN
5 Stars
I would recommend this item to a friend.

Cool Product
August 28, 2014
I bought two of these for my restaurant ceiling. They take a while to install but if you follow the directions it works great. I included a pic of what they look like above the ceiling.
Good quality

Las Vegas, Nevada
5 Stars
I would recommend this item to a friend.

May 24, 2014
Easy to use. Really bright the twinkle mode is great .

Terrebonne, Oregon
5 Stars
I would recommend this item to a friend.

Love it
May 20, 2014
So far it is an amazing product! I would recommend this for anyone trying to put in a conversational piece!!! Love it!

Atlanta, GA
4 Stars
I would recommend this item to a friend.

Very nice product but way too bright to look realistic
August 28, 2014
Very nice product. I would have given it 5 stars if the light could be dimmed some how. They are way to bright to look realistic. No depth of field illusion as your eyes will know they are only a few feet away. I actually painted the leading edge of the fiber optics with black paint to reduce the light output by approx. 75%. Now in my pitch black theater room it looks like you are looking at the night sky. It creates the illusion in the blackness that they could be a million miles away. Right out of the box, the light is so bright you could actually read a book under the stars. Not very realistic.

Questions & Answers
By Erin from Woodstock, GA on August 28, 2014
Do the lights only light the tip of the cable? Or does the entire cable light up? I am looking for a way to create stars on a stage and there is nothing to push the strands through. Will this work if they are just hanging down from the "sky?"
By Jacob from Pegasus Lighting on August 28, 2014

The end of the fiber optic cable is where it's illuminated.
By Mark from Atlanta, GA on August 28, 2014

The light will only come out the end and the rest of the cable is dark.
If you create a crimp in the optic cable by bending it, then it will illuminate right at the bend. You can do this multiple times within a cable but the light output will decrease to each succeeding "crimp" since it is being lost at the previous one(s).
I hope this helps.
By Ben from Prior Lake, MN on August 28, 2014

The entire cable does light up. I am posting a pic of what my ceiling looks like above the ceiling. The stars look great though. Any way you could hang a black tarp and push them through?
By Mark from USA on August 28, 2014

The tips are the brightest part, but enough light leaks from the entire cable that it is easily visible.

By Kristi from Minneapolis, MN on May 26, 2014
Once you install the fiber optics can you paint the ceiling - how does that affect the lighting?
By Chris from Pegasus Lighting on May 27, 2014


The fiber optics will "poke" out tiny holes you put in your ceiling. So, I don't see why you would not be able to paint your ceiling but you should not paint over the fiber optic strand "poking" out of your ceiling.

It would probably be easier to paint the ceiling first and then install the fiber optic lighting. However, if it is already installed then maybe it would be easier to pull the strands out of the ceiling, paint it, and then replace the strands.
By luis from Del Rio, Texas on May 27, 2014

I would suggest you paint first the ceiling first. What I did was paint all the ceiling tiles first and then with an Allen wrench put each light in.
By Ben from Prior Lake, MN on August 28, 2014

I poked the fibers through the ceiling and left about an inch hanging. I then repainted the ceiling and the cut the fibers off almost flush. Worked out great.

By Joe from Savannah, GA on February 10, 2015
What are the dimensions of the light box for the 250 strand model?
By Jacob from Pegasus Lighting on February 11, 2015

The illuminator measures 3-3/8in wide x 5-1/8in long x 2-1/2in high.

By John Mehl from San Clemente, CA on December 2, 2013
What kind of lighting unit is included and does it change colors, does it have different programs etc.?

By Jacob from Pegasus Lighting on December 2, 2013


An LED illuminator is included.

No, it does not change colors or have different programs.

It is white light only with a twinkle wheel, which makes the fibers sparkle.

By Jim from Hazelhurst WI on January 4, 2014
Does this kit include everything needed to operate, and does it plug into 110?
By Jacob from Pegasus Lighting on January 5, 2014

Yes, it's a complete kit and it plugs directly into the wall.
By Phil from Indianapolis, Indiana on January 5, 2014

This kit does come with everything you need. It includes the fiber-optic strands. They are contained in one bundle with a nice metal collar end. The light engine is complete and does plug into a standard 110 socket. It also includes a little remote control that can turn the light engine on, and also switch the light mode from solid to twinkling. I have attached an image of our project that we used the kit for. As seen the kit is up and running with no additional purchase. It is plugged into a normal house socket in our garage.

By Greg from Sanford, Fl. on January 20, 2014
If the light element is in the attic will the remote still work in the room under it?
By Jacob from Pegasus Lighting on January 20, 2014


Yes, the remote will work through the ceiling.

Recently Viewed Items
Related Items
Related Categories