Add sparkling stars to your bedroom ceiling with this LED fiber optic star ceiling kit. It has 200 fibers that twinkle attractive white light while using only 5 watts of power. It also includes a color changing wheel if you wish to have colored light. The LED illuminator simply plugs into power and the remote control turns it on/off.
Total Number of Fibers: 200 0.75mm diameter fibers
Length of Fibers: 9.8ft
Recommended Room Size: 70 sq ft
How it Works: the star ceiling fiber optic acrylic fibers transmit light from an LED illuminator to your ceiling while a twinkle wheel (with alternating opaque and transparent sections) rotates in front of the LED inside the illuminator creating a mesmerizing twinkling effect at the other end of the fibers
White Light or Colored Light : the kit comes assembled with the white light twinkle wheel. An extra color changing wheel is included if you would prefer colored light.
No Heat: fiber optic illumination gives off with no heat
LED Illuminator: energy-efficient white LED illuminator with twinkle wheel
Wattage: only 5 watts
Excellent Rated Life: 50,000 hours of rated life on average
4-Foot Power Cord
Remote Control Included: the remote has (2) buttons - A and B. A controls the off and on mode. B controls the twinkle (twinkle on or twinkle off).
Installation Instructions: please refer to these Installation Instructions (PDF). Always check local electrical codes and the National Electrical Code (NEC) before installing any lighting products. It is also wise to consult with a licensed electrician in your geographical area about any electrical details that you might have questions about and to make certain that you are satisfying all of the appropriate electrical codes.
Ceiling Access: access above the ceiling is required because this is where all of the fibers and the illuminator will be stored
Not Under Water: neither the fibers nor the illuminator should be used under water
Large Quantity Discount: If you would like us to quote on a large quantity of LED Fiber Optic Star Ceiling Kits, please call us at our toll-free number or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.
LED Fiber Optic Star Ceiling Kit with 200 0.75mm Diameter Fibers
5 Stars based on 1 Review(s)
Signal Mountain, TN
I would recommend this item to a friend.
Very easy to install
September 8, 2015
Product was very easy to install and worked well. We installed it in a mobile tour (semi-truck) and we have not had any issues. We used black gator board and drilled small holes for the fibers to be inserted into. Glad I watched a video on Youtube or I would not have known what to do!
Needs individual sections so a person can remove or add large sections to light box
Can the twinkling effect be turned off and have just a stead glow?
By Jacob from Pegasus Lighting on November 5, 2014
Yes, you can turn on/off the twinkling effect using the remote control.
By Benjamin from Racine, WI on February 16, 2015
The instructions mention glue after drilling the holes and feeding the fiber through. What type of glue is recommended?
By Ila from Pegasus Lighting on February 17, 2015
Most of the customers I talk to used either Elmer's Carpenter Wood Glue or Elmer's Household glue. The Elmer's Household glue dries clear!
Good luck with your project!
By Mark Alkema from Hamilton Ontario Canada on February 17, 2015
The best glue to use is school glue. The white glue kids use in school. It goes on white and dries clear. Make sure to not over size your drill holes and fill hole completely with glue. Our Star ceiling turned out amazing!