Description of our 8-Watt 350mA Constant Current Hardwire LED Driver
This 8-watt 350mA constant current driver hardwire LED driver will power your LED lighting systems and has overload, short circuit, and over heat protection.
Uses: used to power LED lighting systems needing 350mA of constant current
Maximum 8 Watts of Load: 8 watts maximum of LED lighting load [Caution: Do not try to power an LED lighting system that needs more than 8 watts of power.]
Minimum 1 Watt of Load: unless this driver is powering at least 1 watt of LED lighting load the LEDs may not work properly. [Caution: If you should decide to power less than 1 watt of LED lighting load with this driver, please be certain that the electric circuit is completely connected before connecting the driver to power. If you do not take this precaution, an inrush of current may cause one or more of the LEDs to fail prematurely.]
Input: 100-240 volts AC, 50-60Hz
Output: 3-24 volts, 350 milliamps (mA)
Dimensions: 7/8in(H) x 1-9/16in(W) x 3-5/16in(L)
Short Circuit Protection: yes
Overload Protection: yes
Overheat Protection: yes
Color: white (like photo above)
3-Year Warranty: this LED driver carries a 3-year warranty
Large Quantity Discount: If you would like us to quote on a large quantity of 8-Watt 350mA Constant Current Hardwire LED Drivers, please call us at our toll-free number, 800.392.4818, or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.
By Alexandra Burr from New York City on February 21, 2013
I have been using the driver for a custom light fixture I have designed. Someone is interested in installing this light in Europe. Can I use this item to connect to European outlets where all outlets are 220V? If I switch out the plug?
By Jacob from Pegasus Lighting on February 21, 2013
The input for this transformer is 100-240V, so you should be able to use it in Europe.
By OJS from Davie, FL on March 17, 2013
Does this mount directly on the bottom of a wood cabinet? Or must it go in a junction box?
By Jacob from Pegasus Lighting on March 18, 2013
I would recommend securing all of the hardwire connections and the driver in a junction box. Whether it is required is dependent on your local electrical codes.
8-Watt 350mA Electronic Hardwire Constant Current LED Driver