Description of Low Profile Medium Bipin Quickwire Fluorescent Lampholder
Use this bipin fluorescent lampholder to secure linear T8 or T12 lamps. Note that this non-shunted lampholder is designed for use with rapid start or programmed start ballasts.
Uses: used with T8 or T12 linear fluorescent lamps [Caution: Not for U-bend fluorescent lamps.]
Rating: 660 watts, 600 volts (660W – 600V)
Non-Shunted: used with rapid start or programmed start ballasts [Caution: Shunted lampholders should be used with instant start ballasts.]
Dimensions: 1-21/32in(H) x 1.25in(W) x 1.25in (total thickness of the base) x 11/32in (face-to-back thickness) (See the Specifications & Measurements tab.)
Slide-On Mounting Grooves: 20 gauge upper and 18 gauge lower grooves for slide-on mounting in open-back socket bars
Heat Resistant Material: molded in white thermosetting urea, which resists heat distortion up to 132°C
Quickwire Pressure Contacts: features high strength brass alloy quickwire pressure contacts with recessed wire wells to insulate against shorting; accept 18 AWG solid, topcoat, or twisted and tinned stranded wire leads
End of Lamp Life Performance: performs well during catastrophic end-of-life lamp failure
UL and CSA Listed
Brand: Triboro, an ALP Lighting brand
Large Quantity Discount: If you would like us to quote on a large quantity of Low Profile Medium Bipin Quickwire Fluorescent Lampholder please call us at our toll-free number, 800.392.4818, or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.
Dimensions of Low Profile Medium Bipin Quickwire Fluorescent Lamp Holder
Low Profile Medium Bipin Quickwire Fluorescent Lampholder