This Fulham 75-watt 12-volt electronic high frequency transformer is fully dimmable and operates multiple MR11 and MR16 halogen lamps. Designed with UL recognized components, it features an auto reset electronic short circuit, along with overload & thermal protection.
Uses: used to power MR11 and MR16 halogen lighting systems
Maximum 75 Watts of Load: 75 watts maximum of lighting load. Unlike most magnetic transformers, these electronic transformers can be used to power the maximum wattage. [Caution: Always attach the load to the transformer before connecting the transformer to power.]
Minimum 10 Watts of Load: minimum load without dimmer is 10 watts; minimum load with dimmer is 20 watts. Unless this transformer is powering at least 10 watts of lighting load it will not work properly.
Input: 120 volts AC, 60 Hz, 0.6 amps
Output: 12 volts AC amps [Caution: a standard AC voltmeter cannot measure the output of a high frequency electronic transformer; instead, a special "true RMS" voltmeter must be used.]
Input Wires: one white and one black 18AWG wire
Output Wires: two blue 12AWG wire
Dimensions: 0.77in(H) x 1.29in(W) x 2.09in(L)
Dimmable: fully dimmable using a dimmer designed for an electronic transformer. An electronic transformer can sometimes work with a standard incandescent dimmer. However, to ensure that your lighting system works effectively with the greatest dimming range we recommend that you use a dimmer that was specifically designed to control an electronic low voltage transformer. Additionally, using this type of dimmer will diminish the possibility of an audible hum when the dimmer is used, especially at low light levels. [Caution: dimmer should always be connected to the input side, 120V side, of a transformer.]
Power Factor: 0.950
Short Circuit Protection
UL Recognized in the USA & Canada
2 Year Warranty
Large Quantity Discount: If you would like us to quote on a large quantity of Fulham Pony 75W 12V Electronic Low Voltage Transformers, please call us at our toll-free number or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.
My lamp runs 2 30W bulbs, they seem dim. Would wiring the 2 blue wires together brighten the light? I'll check the dimmer.
By Jacob from Pegasus Lighting on July 18, 2013
No, wiring the two blue wires together is not a good idea. The blue wires should connect to two leads from the light fixture. I would strongly suggest consulting an electrician if you are unsure how to wire your transformer.