By Jeff from Boston, MA on April 24, 2015
I have installed two sets of LEDme puck lights. Both have identical parts, one set works perfect, yet I am having flickering on one set when my low voltage electronic dimmer is in the full on position. If in a more dimmed position, there's no flickering. Any ideas?? Is my 60 watt dimmer bad?
By Jacob from Pegasus Lighting on April 26, 2015
Answer:It could be the dimmer, the transformer, or even the lights. You could try troubleshooting the circuit with an electrician to make sure everything is installed correctly. Another idea is to swap the transformers in the two systems to see if it is indeed the transformer.
By Rich from Libertyville, IL on April 25, 2015
Answer:I just mounted the same lights using the same transformer. I have them wired to a direct switch and not a dimmer. (Thus they are getting full voltage / current) I am using (3) puck lights. One night a day after installation they were flickering, so I called the manufacturer and they told me that it was either a poor connection or a bad transformer. They also said the transformer has a 5 year warranty. I have checked the lights almost every day for a few weeks and they have been OK.
By Jeff from MA on March 30, 2015
Can this be connected to 120V power behind the drywall, and have leads from individual puck lights connected to it? The goal is to conceal the installation. What is recommended?
By Jacob from Pegasus Lighting on March 30, 2015
Answer:We strongly recommend consulting an electrician for the proper installation location of a transformer in order to comply with local and national electric codes.
By Mike from Boston, MA on March 30, 2015
Answer:Hi Jeff, I am a licensed electrician. A transformer of any type should never be concealed. It is a heat producing item that needs to "breathe". Installing it in a cabinet is OK, but should never be concealed under any circumstances. Good luck with the install!