Description of LED 6-Watt 12-Volt MR16 Spot Wall Clamp Display Light with a Double Bend Fixed Arm
This LED display light, available in two finishes, will illuminate your artwork or display with bright, long-lasting light in a 40º flood beam spread. It’s perfect for trade shows and is approved by the Las Vegas Convention Center.
- 2 Finishes to Choose From:
- Mounting Bracket Included: bracket will mount on a wall with a maximum thickness of 2.25in
- Double Bend Fixed Arm: a fixed arm with a maximum length of 14in and a diameter of 3/8in
- What's Included:
Sturdy fixed arm display light
6-Watt LED MR16 Light Bulb
- LED Light Bulb Included: MR16 lamp with 3 LEDs
- Wattage: only 6 watts
- Voltage: 12 volts
- 2 Color Temperatures: neutral white or warm white color temperature
- Illumination: PA-MR16LED-WW is roughly equivalent to a halogen 50-watt MR16 3000K light bulb; PA-MR16LED-NW is roughly equivalent to a halogen 50-watt MR16 4000K light bulb
- Very Long Life: 50,000 hours of rated life on average
- Beam Spread: 40º flood beam spread
- No Harmful UV Radiation: LED MR16 lamp emits no UV radiation. [Caution: UV radiation from a halogen MR16 lamp can cause color change and surface deterioration over time.]
- Cool Operation: gives off very little heat
- Spare Light Bulbs: to purchase spare light bulbs for this fixture, please order in the Accessories tab
- All of these items are ordered separately on the Accessories tab.
- 2 Plug-In Drivers Available: one 12-volt DC plug-in driver is required for each run of LED display lights. Two drivers are available: the PE5304 powers 1-4 fixtures; the PE5308 powers 5-8 fixtures. Both have a 10-foot lead wire with a Molex® connector.
- Low Voltage Splitters: splitters allow several fixtures to be connected to a single driver
- Extension Cord: adds 10ft of additional lead wire from the power source to the beginning of the electrical run
- In-Line Rotary Dimmer: can dim up to 4 MR16 LED light bulbs
- Easy to Install: mount the LED display light on a wall using the provided mounting bracket and then connect the display light(s) to the plug-in driver
- Spacing Guidelines: If there are specific display items that need to be highlighted (e.g., paintings), then use one display light for each item unless the item is especially wide. If the item is especially wide, then use two display lights. Otherwise, use one display light for approximately every 2 feet of horizontal display space.
- Las Vegas Approved
- 1-Year warranty
- Large Quantity Discount: If you would like us to quote on a large quantity of LED 6-Watt 12-Volt MR16 Spot Wall Clamp Display Lights please call us at our toll-free number, 800.392.4818, or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.