LED 6-Watt 12-Volt MR16 Spot Fixed Arm Wall Clamp Display Light with Mesh Shade

Description of LED 6-Watt 12-Volt MR16 Spot Fixed Arm Wall Clamp Display Light with Mesh Shade

This LED battery display light has a sturdy arm and a mesh head that encases the energy efficient LED MR16 lamp. Its 40º flood beam spread ensures your artwork or display will be set off by beautiful spot lighting.

LIGHT FIXTURE

• 2 Finishes to Choose From:
  Silver
  Black
• Versatile Mounting Bracket Included: bracket will mount on a wall with a maximum thickness of 2in or on a pipe with a minimum diameter of 0.5in and a maximum diameter of 1.75in.
• Sturdy Fixed Arm: a fixed arm with a maximum length of 16in and a diameter of 0.5in

LIGHT BULB

• LED Light Bulb Included: MR16 lamp with 3 LEDs
• Wattage: only 6 watts
• Voltage: 12 volts
• 2 Color Temperatures: neutral white or warm white color temperature
• Illumination: PA-MR16LED-WW is roughly equivalent to a halogen 50-watt MR16 3000K light bulb; PA-MR16LED-NW is roughly equivalent to a halogen 50-watt MR16 4000K light bulb
• Very Long Life: 50,000 hours of rated life on average
• Beam Spread: 40º flood beam spread
• No Harmful UV Radiation: LED MR16 lamp emits no UV radiation. [Caution: UV radiation from a halogen MR16 lamp can cause color change and surface deterioration over time.]
• Cool Operation: gives off very little heat

COMPONENTS

• 2 Plug-In Power Supplies: one 12-volt DC plug-in power supply is required for each run of LED display lights. Two power supplies are available: the PE5304 powers 1-4 fixtures; the PE5308 powers 5-8 fixtures. Both power supplies have a 10-foot lead wire with a Molex® connector. Purchase on the Accessories tab.
• Low Voltage Splitters: splitters allow several fixtures to be connected to a single power supply
• Extension Cord: adds 10ft of additional lead wire from the power source to the beginning of the electrical run

INSTALLATION

• Easy to Install: mount the LED display light on a wall or pipe using the provided mounting bracket and then connect the display light(s) to the plug-in power supply
• Spacing Guidelines: If there are specific display items that need to be highlighted (e.g., paintings), then use one display light for each item unless the item is especially wide. If the item is especially wide, then use two display lights. Otherwise, use one display light for approximately every 2 feet of horizontal display space.

OTHER

• Las Vegas Approved
• 1-Year warranty
• Large Quantity Discount: If you would like us to quote on a large quantity of LED 6-Watt 12-Volt MR16 Spot Wall Clamp Display Lights please call us at our toll-free number, 800.392.4818, or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.