LED 6-Watt 12-Volt MR16 Fixed Arm Wall Clamp Display Light with Adjustable Barn Doors

Description of LED 6-Watt 12-Volt MR16 Fixed Arm Wall Clamp Display Light with Adjustable Barn Doors

Replace your halogen display lights with this energy-efficient LED MR16 display light. It has adjustable barn doors and includes a mounting bracket and plug-in driver for easy installation.

LIGHT FIXTURE

• Black Finish
• Adjustable Barn Doors: allow you to light the exact area that you want lit without producing any light "overspill"
• Versatile Mounting Bracket Included: bracket will mount on a wall with a maximum thickness of 2in or on a pipe with a minimum diameter of 0.5in and a maximum diameter of 1.75in. This clamp also includes a Slide Block, which allows the stem of the display light to be slid forward or backward and then tightened into position.
• Sturdy Fixed Arm: a fixed arm with a length of 16in and a diameter of 0.5in
• What's Included
  Fixed arm display light with adjustable barn doors
  6-watt 12-volt LED MR16 lamp
  Dual purpose adjustable bracket
  Plug-in driver with 10-foot power cord

LIGHT BULB

• LED Light Bulb Included: MR16 lamp with 3 LEDs
• Wattage: only 6 watts
• Voltage: 12 volts
• Neutral White Light: neutral white color temperature
• Illumination: roughly equivalent to a halogen 50-watt MR16 light bulb
• Very Long Life: 50,000 hours of rated life on average
• Beam Spread: 40° flood Beam Spread
• No Harmful UV Radiation: emits no UV radiation. [Caution: UV radiation from a halogen MR16 lamp can cause color change and surface deterioration over time.]
• Cool Operation: gives off very little heat
• Dimmable
• Spare Light Bulbs: to purchase spare light bulbs for this fixture, please order in the Accessories tab

OPTIONAL ACCESSORIES

All of these items are ordered separately on the Accessories tab.

• In-Line Rotary Dimmer
• Extension Cord: adds 10ft of additional lead wire from the driver to the beginning of the electrical run

INSTALLATION

• Easy to Install: mount the LED display light on a wall using the provided mounting bracket and then connect the display light to the plug-in driver
• Spacing Guidelines: If there are specific display items that need to be highlighted (e.g., paintings), then use one display light for each item unless the item is especially wide. If the item is especially wide, then use two display lights. Otherwise, use one display light for approximately every 2 feet of horizontal display space.

OTHER

• Las Vegas Approved
• 1-Year Warranty