White MR16 Halogen Telescoping Display Light (OPEN BOX ITEM)

Description of White MR16 Halogen Telescoping Display Light (OPEN BOX ITEM)

ENJOY BIG SAVINGS on this open box item! This attractive low voltage (12 volts) white display light comes with a 50-watt MR16 halogen light bulb, a quiet electronic transformer, a telescoping arm that extends 22 to 32 inches with a fully adjustable head.

LIGHT FIXTURE

• WHITE FINISH
• Adjustable Arm: telescoping arm, attached to the standard wall clamp, extends from 22 inches to 32 inches
• Adjustable Light: 90 degrees vertical and 355 degrees rotation
• Weight: approximately 3.5 pounds (includes standard clamp, telescoping arm, fixture head, plug-in transformer, and MR16 light bulb)

LIGHT BULB

• MR16 Halogen Light Bulb Included: a 50-watt 12-volt MR16 halogen lamp with a safety front glass and a flood beam spread (EXN-FG) is included. You may purchase replacement lamps in the Accessories tab.
• Maximum Wattage: 50 watts
• Fixture Has Safety Front Lens: supplied with a clear glass lens that is secured between two metal "C" rings

TRANSFORMER

• Quiet Electronic Transformer: supplied with a 60-watt plug-in electronic transformer that has a
  3-prong grounded plug. The transformer is detachable from the 11.5ft cord that, in turn, is permanently attached to the display light.
• On/Off Switch: an on/off rocker switch is located on the transformer

ACCESSORIES

• 3 Clamps: the Standard Wall Clamp that is supplied with this display light is designed to mount the display light on a wall with a maximum thickness of 2.5 inches. If you need to attach this display light to a cylindrical pipe (1.5in to 2.5in in diameter), then you should consider purchasing the special Pipe Clamp. If you need to attach this display light to a very thick wall (2in to 4in thick), then you may want to purchase the special Large Wall Clamp for this purpose. You can order these optional clamps in the Accessories tab.
• Colored Filters: 7 colored glass filters (red, amber, yellow, green, emerald green, light blue, and blue) and an Optivex UV glass filter can be used with this fixture. You can order these optional filters in the Accessories tab. Please be careful to order the correct size for these optional filters. If you want to use a colored glass filter, you must also order a Clip-On Holder to hold the filter in place.
• Honeycomb Louver: a black honeycomb louver can be used with this fixture You can order these optional louvers in the Accessories tab. If you want to use a honeycomb louver, you must also order a Clip-On Holder to hold the louver in place.
• Lenses: a spread lens or a linear spread lens can be used with this fixture. You can order these optional lenses in the Accessories tab. Please be careful to order the correct size for these optional lenses. If you want to use a lens, you must also order a Clip-On Holder to hold the lens in place.
• Clip-On Holder: a black clip-on holder must be used to hold a 2in glass light filter, a honeycomb light louver, or a glass lens on the MR16 lamp. You can order these optional Clip-On holders in the Accessories tab.

OTHER

• Specifications Sheet: to learn more details about this display light please click Spec Sheet
• Spacing Guidelines: If there are specific display items that need to be highlighted (e.g., paintings), then use one display light for each item unless the item is especially wide. If the item is especially wide, then use two display lights. Otherwise, use one MR16 halogen display light for approximately every 2 feet of horizontal display space.
• Las Vegas Convention Center Guidelines: As long as it is used with an MR16 halogen lamp that has an integral front glass and has a wattage that does not exceed 50 watts this display light is also approved to be used at the Las Vegas Convention Center. Please read the LVCVA Policy on Halogen Lighting for complete details.