Description of MR16 Halogen Flexible Display Light
This flexible 20-inch arm, low voltage (12 volts) display light is available in either black or white. This exhibit arm light includes a 50-watt MR16 halogen lamp and a quiet electronic transformer and is ideal for lighting trade show booths, museum exhibits, retail displays, artwork, signs, or wall hangings.
LIGHT FIXTURE
- 2 Models:
PDL-214-WT-L: White finish
PDL-214-BK-L: Black finish
- Flexible Arm: a flexible 20in arm, attached to a standard wall clamp, can direct the light exactly where it is needed
- Weight: approximately 3 pounds (includes standard clamp, flexible arm, fixture head, plug-in transformer, and MR16 light bulb)
LIGHT BULB
- MR16 Halogen Light Bulb Included: a 50-watt 12-volt MR16 halogen lamp with a safety front glass and a flood beam spread (EXN-FG) is included. You may purchase replacement lamps in the Accessories tab.
- Maximum Wattage: 50 watts
- Lamp Has Safety Front Lens: the MR16 lamp has a front glass for safety
TRANSFORMER
- Quiet Electronic Transformer: supplied with a 60-watt plug-in electronic transformer that has a
3-prong grounded plug. The transformer is detachable from the 8ft cord that, in turn, is permanently attached to the display light.
- On/Off Switch: an on/off rocker switch is located on the transformer
ACCESSORIES
- Standard Wall Clamp Included: the Standard Wall Clamp that is supplied with this display light is designed to mount the display light on a wall with a maximum thickness of 2.5 inches.
- Optional Clamps Available: If you need to attach this display light to a cylindrical pipe (1.5in to 2.5in in diameter), then you should consider purchasing the special Pipe Clamp. If you need to attach this display light to a very thick wall (2in to 4in thick), then you should purchase the special Large Wall Clamp for this purpose. You can order these optional clamps in the Accessories tab.
- Colored Glass Filters: 7 colored glass filters (red, amber, yellow, green, emerald green, light blue, and blue) and an Optivex UV glass filter may be used with this fixture. You can order these optional colored glass filters in the Accessories tab. Please be careful to order the correct size for these optional filters. If you want to use a colored glass filter, you must also order a Clip-On Holder to hold the filter in place.
- Honeycomb Louver: a black honeycomb louver may be used with this fixture You can order these optional louvers in the Accessories tab. If you want to use a honeycomb louver, you must also order a Clip-On Holder to hold the louver in place.
- Lenses: a spread lens or a linear spread lens may be used with this fixture. You can order these optional lenses in the Accessories tab. Please be careful to order the correct size for these optional lenses. If you want to use a lens, you must also order a Clip-On Holder to hold the lens in place.
- Clip-On Holder: a clip-on holder must be used to hold a 2in glass light filter, a honeycomb light louver, or a glass lens on the MR16 lamp. You can order these optional clip-on holders in the Accessories tab.
OTHER
- Specifications Sheet: to learn more details about this display light please click Spec Sheet
- Spacing Guidelines: If there are specific display items that need to be highlighted (e.g., paintings), then use one display light for each item unless the item is especially wide. If the item is especially wide, then use two display lights. Otherwise, use one MR16 halogen display light for approximately every 2 feet of horizontal display space.
- Las Vegas Convention Center Guidelines: as long as it is used with an MR16 halogen lamp that has an integral front glass and has a wattage that does not exceed 50 watts this display light is also approved to be used at the Las Vegas Convention Center. Please read the LVCVA Policy on Halogen Lighting for complete details.
- Large Quantity Discount: If you would like us to quote on a large quantity of MR16 Halogen Flexible Display Lights (12 or more), please call us at our toll-free number, 800.392.4818, or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.

Select the quantity of your Accessories below, then click the Add to Cart button at the bottom of the Accessories tab.
 By Lisa from Rhode Island on October 2, 2012 I make gold & silver jewelry with Swarovski crystals and I need a portable light to use in Trade Shows which will make my jewelry "pop" and sparkle. I THINK I need a halogen light, but perhaps LED would work also. What would you recommend?
If you want to see what I make, check out my Website @ www.originalsbylisa.com
Thanks, Lisa By Jacob from Pegasus Lighting on October 2, 2012Answer:Lisa,
Both halogen and LED lights will make your jewelry "pop".
This halogen light in particular is very bright and is easy to quickly attach using the clamp.
LED is generally more expensive but uses less energy and won't require replacement light bulbs. I personally love this LED display light because it is exceptionally bright. http://www.pegasuslighting.com/display-light-led-wall-wash-psl3000ledb.html
By Bob from Chicago, Illinois on October 2, 2012Answer:Lisa,
I purchased this fixture to specifically light a piece of artwork (sculpture). My decision was based on the fact that with halogen MR16 bulbs you have such flexibility in bulb selection (wattage and degree of light spread). In my case I used a "very narrow spot". These bulbs are very bright and I think it would work for your purpose. LEDs are certainly the wave of the future but you might not find the breath of selection at this time.
Good luck,
Bob
MR16 Halogen Flexible Display Light
 |
4.5 Stars based on 3 Review(s)
|
 |
Fred K.
Kittery, Maine
5 Stars
I would recommend this item to a friend.
|
Best Light for my use!
August 9, 2011
I looked at many lights, but this one is perfect. I make custom split bamboo fly rods, and this light is used to highlight the magnificent coloration of my rods when they are on display. I can bend the light to highlight any area, and it's thin profile is unobtrusive. I am glad I ordered the hood to focus the light toward my rods and not allow any to escape out the back side. I highly recommend!!!!!
Fred Kretchman
Pros:Compact, well-made, easily adjustable, slim profile, excellent coverage...
Cons:Nothing
|
Heidi
CA
5 Stars
I would recommend this item to a friend.
|
Great Service & Item
July 9, 2011
Item is exactly as stated and looks great. Pegasus Customer Service is one of a kind - hands on wonderful experience. Thanks again!
|
Matt P
Miami
4 Stars
I would recommend this item to a friend.
|
Good quality
April 7, 2011
Found it to be of very good quality. Didn't fit my need but bet it would work great as a spot pointed away from person looking.
|
|
  |  |  | | | | $79.00 Add to Cart to see Discounted Price | $44.90 | $112.00 Add to Cart to see Discounted Price |
| | |
|
| |   $79.00 Add to Cart to see Discounted Price |  from $36.00 |  $55.00 |
 |