By Gina from Cleveland, OH on September 16, 2012
What is the diameter of the holder, please? I plan to use it with Tech Lighting Joshua picture lights with the "Lil' Wok" shade, which does not provide much clearance around the bulb.
By Jacob from Pegasus Lighting on September 17, 2012
The outside diameter is 2in. The inside diameter is 1.75in.
Hope this helps.
By Jeff Coates from Royal Oak, MI on September 17, 2012
Answer:Outside diameter is 2 1/16 " - Inside diameter is 1 3/4" - comes with a clear glass lens.
By Patrick from Atlanta, GA on September 17, 2012
Answer:I've purchased these same holders this year and am more than satisfied. The reflector of an MR16 lamp is 2 inches (51 mm) in diameter which means these holders are 2 inches in diameter as well. The Tech Lighting Joshua Picture light that you are considering would be fine with these holders considering they use the MR16 light bulb. The shape of the shade leaves loads of clearance for these holders to clip onto the bulb with no interference from the shade.
By Ron from Fort Riley, Kansas on September 10, 2013
Will these work on LED mr-16 bulbs?
By Jacob from Pegasus Lighting on September 10, 2013
In general, yes they should fit on LED MR16. There are some exceptions because LED MR16 lamps can have a non-traditional design.
Here's an example - http://www.pegasuslighting.com/philips-led-mr16-light-bulbs-10w-12v-narrow-flood-dimmable.html
Notice how the top of the lamp is narrower than the body. The lens wouldn't fit on a lamp like this.
By Jeff from Lewes, DE on September 10, 2013
Answer:I used the clip on holder to secure colored lens that I just placed over existing landscape lighting fixtures for Holiday displays. They worked perfectly since the diameter fit nicely into the existing light housing.
By Rich from Nirvana on September 10, 2013
Answer:MR (16) is the lamp diameter in 1/8" increments. So it's 2" in diameter. It doesn't matter if the lamp is LED, halogen, incandescent, etc.
By Angela from Los Angeles, CA on September 10, 2013
Answer:Yes they are a perfect fit for the MR16 bulbs.
By Chris from South Florida on December 21, 2013
Will these work for PAR 16s as well?
By Jacob from Pegasus Lighting on December 24, 2013
Answer:The clip on holder does fit around a PAR16 without the glass filter. But since the front glass on a PAR16 is not flat, once you place a glass filter in the holder, it will not work.