About our 6-Inch LED Dimmable Retrofit Module for Recessed Lights, 575 Lumens, 9.5W, 2700K, Wet Location
Retrofit your recessed lights with this affordable 6-inch LED module and enjoy tremendous energy savings and 50,000 hours of rated life. The module uses high quality Cree LEDs to provide the same warm white light as standard incandescent light bulbs. It's fully dimmable and very easy to install.
- Model: 575 lumens with an E26 medium screw base
- Trim Finish: this LED retrofit module comes with a white reflector & flange. (Flange: a rim, collar, or ring around the outside of the reflector. Recessed Trim = reflector + flange.)
- Overall Height: 6.25in
- Diameter: 7.5in including the trim's flange (outside diameter)
- Heat Sink: dissipates heat from LEDs, keeping their temperature low and increasing their rated life
- CREE LEDs: this module uses Cree True White Technology with an integral LED driver
- Light Output: 575 lumens
- Wattage: only 9.5 watts
- Efficacy: 60.5 lumens/watt
- Warm White Light: color temperature of 2700K (warm white, similar to incandescent)
- Excellent Color Rendering: 90 CRI
- Very Long Life: 50,000 hours of rated life on average
- Base: E26 medium screw base
- Input Voltage: 120V, 60Hz AC
- Dimmable: down to 5 percent with most incandescent dimmers. For a complete list of dimmers view the Recommended Dimmers List (PDF).
- Retrofit or New Construction: this recessed light module can be used in previously installed downlights or with new construction recessed lights
- Easy to Install: just remove existing lamp and trim, attach the module's base adapter to existing socket, and secure LED downlight module in housing with built-in clips. Please refer to these Installation Instructions (PDF). Always check local electrical codes and the National Electrical Code (NEC) before installing any lighting products. It is also wise to consult with a licensed electrician in your geographical area about any electrical details that you might have questions about and to make certain that you are satisfying all of the appropriate electrical codes.
- Housing Compatibility: designed for use in standard line voltage (120V) 6-inch IC or Non-IC housing.
- Suitable for Wet Locations
- ENERGY STAR Qualified
- UL Listed in USA & Canada
- 5-Year Warranty
- Large Quantity Discount: If you would like us to quote on a large quantity of 6-Inch Retrofit Modules for Recessed Lights, please call us at our toll-free number or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.
6-Inch LED Dimmable Retrofit Module for Recessed Lights, 575 Lumens, 9.5W, 2700K, Wet Location
By Jake from Vickery, OH on November 23, 2013
Can you use this with a Juno IC22 recessed fixture?
By Jacob from Pegasus Lighting on November 24, 2013
We do not sell Juno IC22, so I can't tell you for sure. It is designed to fit in standard 6in housings with medium base sockets.
Check out the installation instructions which outline housing compatibility requirements, including the dimensions requirements in Figure 1.
By Barb from Akron, Oh on August 28, 2013
Can you put insulation between this fixture and the roof?
By Jacob from Pegasus Lighting on August 28, 2013
This item is designed to install in a 6-inch housing. If that housing is IC rated, then yes, insulation can contact the housing above the ceiling.